Options; Deactivating The Acoustic Signals - Zanussi ZDV 14001 Manual De Instrucciones

1)
Programme
2)
3)
4)
1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of
dishes can change the programme duration and the consumption values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) This is the standard programme for test institutes. With this programme you have the most efficient use of
water and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test
information.
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and
bad odours to come out from the appliance.
Do not use detergent with this programme.

Options

Acoustic signals
The acoustic signals operate in these condi-
tions:
• The programme is completed.
• The level of the water softener is adjusted
electronically.
• The appliance has a malfunction.
Factory setting: on. You can deactivate the
acoustic signals.

Deactivating the acoustic signals

1. Press the on/off button to activate the appli-
ance.
2. Make sure that the appliance is in setting
mode. Refer to 'SETTING AND STARTING
A PROGRAMME'.
3. Press and hold function buttons (B) and (C)
at the same time until the indicators of func-
tion buttons (A), (B) and (C) flash.
4. Press function button (C),
18
Degree of soil
Type of load
Normal soil
Crockery and cut-
lery
Fresh soil
Crockery and cut-
lery
Normal soil
Crockery and cut-
lery
All
Programme pha-
ses
Prewash
Wash 65 °C
Rinses
Dry
Wash 65 °C
Rinse
Prewash
Wash 50 °C
Rinses
Dry
Prewash
• The indicators of function buttons (A)
and (B) go off.
• The indicator of function button (C) con-
tinues to flash.
• The end indicator comes on.
5. Press function button (C). The end indicator
goes off, the acoustic signals are deactiva-
ted.
6. Deactivate the appliance to confirm.
Activating the acoustic signals
1. Refer to 'Deactivating the acoustic signals',
step (1) through (3).
2. Press function button (C),
• The indicators of function buttons (A)
and (B) go off.
• The indicator of function button (C) con-
tinues to flash.
• The end indicator is off.
Duration Energy
(min) (kWh)
90 - 100 1.1 - 1.2
30 0.8
160 - 170 0.8 - 0.9
12 0.1
www.zanussi.com
Water
(l)
15 - 16
8
12 - 13
3.5