gb
removed for transport and storage. There is risk of
injury from unintentionally pressing the on/off switch.
- To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.
After-Sales Service and Application Service
Our after-sales service answers to your questions
concerning maintenance and repair of your product as
well as spare parts.
Transport
The contained lithium-ion batteries are subject to the Dan-
gerous Goods Legislation requirements. The batteries are
suitable for road-transport by the user without further re-
strictions.
When shipping by third parties (e.g.: by air transport or
for-warding agency), special requirements on packaging
and la-belling must be observed. For preparation of the
item being shipped, consulting an expert for hazardous
material is required.
Dispatch battery packs only when the housing is undam-
aged. Tape or mask off open contacts and pack up the
bat-tery in such a manner that it cannot move around in
the packaging. Please also observe the possibility of more
de-tailed national regulations.
Disposal
The machine, accessories and packaging should be sorted
for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2012/19/
CEfor
Equipment and its implementation into national
right, power tools that are no longer usable
must be collected separately and disposed of in
an environmentally correct manner.
Subject to change without notice.
Battery packs/batteries:
Only for EC countries:
Defective or dead out battery packs/batteries must be
recycled according the guideline 2006/66/ECC.
Waste
Electrical
and
Li-Ion:
Please observe the instructions in
section "Transport". Do not dispose of
battery packs/batteries into household
waste, fire or water. Battery packs/
batteries should be collected, recycled
or disposed of in an environmental-
friendly manner.
ENGLISH
14
7. Regulations
7.1 Technical Data
= Battery
= Voltage
= Battery Power
= charging time
=Nails capacity
= Staples capacity
=Weigth
= Sound power level
=Sound pressure level
=Vibration
The values given are valid for nominal voltages [U]
230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz for the battery
charger and 18VDC for the tool battery. For lower voltage
and models for specific countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual machines
may vary.
Electronic
14