Bose A30 AVIATION HEADSET Manual De Instrucciones página 31

3. On the terminator cover, open the latch.
4. Gently pull the terminator cover from the socket.
Replace the microphone assembly and terminator cover
1. Align the base of the microphone assembly with the socket on the earcup and
slide in until secure.
2. At the base of the microphone assembly, close the two latches.
3. Align the terminator cover with the socket on the other earcup and slide in
until secure.
CAUTION: Do NOT force the terminator cover into the socket.
NOTE: If the terminator cover is not securely installed, there will be no
audio in the earcup.
4. On the terminator cover, close the latch.
5. Test the headset before flight.
M I CROP HON E P L ACE M E NT
|
3 1 E N G