Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT: carefully read the instructions in this manual as well as the general safety instructions
before using this tool.
Keep these manuals for further reference.
Accessories:
1 Spanner
2Brush
1 Oil Box
1 Pointed chisel
1 Flat chisel
The tool should be connected to a power source connected to earth.
If your installation needs an extension, make sure it is equipped with an earth plug.
Wearing of protection goggles advised
Wearing of protection against noise advised
Wearing of protective shoes advised
Wearing of respiratory protection advised
This tool is designed to break, scale, drive...concrete or similar materials. For example the installa-
tion of tubes, cables, washroom facilitles of draining, and other civil engineering works.
1. RECOMMENDATIONS
1. Wear protection equipment (goggles, shoes, glass, gloves ,etc.), avoid wearing jewellery, attach
long hair and wear close-fitting clothing.
2. Unplug your tool from the mains when you are not using it, when changing tools or for maintenan-
ce.
3. Work in a clean and uncluttered workspace. Your work area should be correctly lit.
4. Store the tool in a dry place, far from sources of heat or of dangerous vapors (ideal:10 to 15°). Do
not operate your tool near explosive or inflammable materials.
5. Work with tools in good condition and adapted to the task to undertake. This equipment should
be used as such and should not be overloaded. The tool should always be used with its additional
handle (B) and firmly held with both hands.
6. Before each use, check the oil level, the tightening of screws, the correct mouthing of the drive
spindle.
7. Make sure of not driving into live parts or gas or water pipes, etc. You would risk electrocution or
an explosion. Detect any live or metallic parts before starting to work (for example, a live wire in a
wall with a metals detector).
8. Do not try to open or dismantle the tool pour to intervene by yourself.
Only a competent and specialized service ca intervenes in complete safety, by using origin parts
and the manufacturer's drawings.
9. Use auxiliary handles supplied with the tool.
2. GENERAL SAFETY RULES
WARNING: Read all instructions Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to
your mains operated(corded)power tool or battery operated(cordless) power tools.
2
Publicidad
