Publicidad
Idiomas disponibles
Idiomas disponibles
A. Trigger lock button (on)
B. Trigger with blade speed control knob
C. Engine
D. Power cord
E. Guide that holds the workpiece
F.
Blade tensioning lever
G. Workpiece clamping knob
H. Workpiece pressure stabilization lever
I.
Lever for adjusting the length of the cut piece
J.
Base with a worktop
K. Cutting device lifting lock
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Maintain a
minimum distance of 30 cm from each side of the unit. Keep the unit away from any
hot surfaces. Always operate the unit on a level, stable, clean, fireproof, and dry
surface and out of the reach of children and persons with impaired mental, sensory,
and intellectual functions. Place the unit in such a way that the main plug can be
reached at any time. Ensure that the power supply to the unit corresponds to that
specified on the identification plate!
ASSEMBLY OF THE DEVICE
Publicidad
