SWANDOO CHARLIE Manual De Instrucciones página 4

EN
REPLACING YOUR FABRIC COVER
Detach the pressure buttons on both sides of
1
the headrest cover and remove the fabric from the
headrest by simply lifting it up from the edges.
There are two small loops behind the cover
beneath the headrest, holding it in place - make
sure to detach these first.
Open the fabrics on the back of the child seat.
1 2
To prevent the cover from slipping forwards
2 3
whilst in use, there are two small loops beneath
the cover holding it in place in the seating area.
Ensure the cover is detached from the hooks by
pinching the cover at each side of the seating area
and pulling towards the centre of the seat prior to
removing the fabric completely.
Loosen the whole cover by lifting it up from the
3 4
edges. Pay particular attention to the area around
the Side Impact Buddy socket - the blue plastic
socket does not have to be removed.
To install the new cover or reinstall an existing
5
one, first grab the fabric installation tool. Unless
removed prior to washing the cover, you'll find the
fabric installation tool behind the headrest. Tuck
the fabric edge into the right position around the
edges of the seat.
Ensure the cover is reinstalled the same way they
previously were. You can follow the previous steps
in reverse order to make sure everything is in
place.
Pat yourself on the back! Remember how
5 6
easy was life before kids? Worry not! We've got
you covered with award-winning child restraint
systems!
4