Emerio MS-125000 Manual De Instrucciones página 7

OPERATION
Before using the appliance for the first time, clean thoroughly.
Place the appliance on a smooth and clean surface. During operation, press firmly down on the rubber feet to
prevent the appliance from slipping.
Assemble the carriage, attach vertically in the side guide groove and place on the table.
Pic 3
Adjust the cutting width with the knob.
Pic 4 and 5
Instantaneous switching

Press switch-on safety device. Simultaneously press ON button until the power tool starts running.

Release the switch-on safety device again.

To stop the appliance, release the ON button.
Pic 6
Stainless steel circular blade.
Pic 8
Attach the remnants holder, cut. Always use the carriage and remnants holder!
Notes
Cut sausage and cheese first and bread last. The appliance is then easier to clean.
For reasons of hygiene, the appliance and the blade should be cleaned immediately after slicing greasy food (e.g.
meat, sausage, cheese).
SLICING
Gently press the food to be sliced against the stop plate and slowly slide it against the moving blade.
Do not operate the appliance without the carriage and rest holder unless absolutely necessary due to the shape
and size of the food.
CLEANING
•
The appliance requires no maintenance! Thorough cleaning guarantees a long service life.
•
Appliance surface may be damaged, so do NOT use any abrasive cleaning agents.
•
Wipe the appliance and attached parts with a damp cloth and then a dry cloth.
Risk of injury from sharp blade!
Before cleaning the appliance, pull out the mains plug and remove the blade. Do NOT grip the blade by the cutting
surface, but by the blade attachment.
Cleaning the circular blade
Thoroughly clean the circular blade after each use by hand.
Pic 10
Fold up the table and take out of the hinge to the right.
Pic 6
Rotate the blade holder in a clockwise direction and place vertically. Then take out the circular blade.
- 6 -