Limora 18511 Manual De Instrucciones página 3

Instruction manual Jack
(ID 18511)
Lifting height 145 mm to 500 mm
Lifting capacity bis 3.500 kg
Assembly
Remove the securing wedge.
Place the pedal on the axle and tighten the screw.
Put the lifting rod together and place it in the mounting, then
secure it with the knurled screw.
Use
The jack may only be operated on level solid ground.
Secure the vehicle against rolling away.
Find a suitable location on the vehicle as a point of contact
for the jack (consult the vehicle's operating instructions if
necessary).Now turn the lifting rod to the right to close the
hydraulic valve.
Spare Parts for Classic British Cars
Now use the foot pedal to operate the quick lift until the
jacking point has reached the required point on the vehicle.
Check once again that the jacking point is correctly positio-
ned.
Now pump the vehicle to the required height with the lifting
rod.
To lower the jack, turn the lifting rod slowly to the left to
open the hydraulic valve again.
L
imora central warehouse
Industriepark Nord 21
D - 53567 Buchholz
Tel: 49 (0) 26 83 - 97 99 0
E-Mail: Limora@Limora.com
Internet: Limora.com
Stores:
• Aachen • Berlin • Bielefeld
• Düsseldorf • Hamburg
• Köln • Stuttgart