Care Instructions; Storage Instructions - medi 4C Instrucciones De Uso

scissors. In this case, please smoothen
off the ends of the belt. Only one buckle
needs to be folded back to remove the
brace.
Caution: Do not bend the buckle too
far! The belt can now be simply pulled out.
medi 4C with cliplock
Setting belt length
Adjust the belt length with the Velcro
fastener (J) and the guide loop (K) so that
the compression pad (L) sits in the
middle of the back. Please ensure that
the grip fastener pulls in about 5 cm of
the belt. Cut the side padding of the
compression pad to fit. Please ensure
that the padding of the compression pad
(L) and that of the side section do not
overlap.
Closing the cliplock
Fold the buckle (M) back and press it
downwards. The closer is now fixed.
Please ensure that the clip has been fully
pushed down.
You are recommended to check the
function of the medi 4C and make any
necessary adjustments on the day
after fitting. To make wearing more
comfortable we recommend the patient
wears a T-Shirt under the brace.

Care instructions

Wipe the brace with a damp cloth. The
back compression pad can be cleaned
with a hand brush.
• Do not bleach.
• Leave to dry naturally.
• Do not iron.
• Do not dry clean.
    

Storage instructions

Store in a dry place at room temperature.
Protect from heat, direct sunlight and
moisture
Material composition
Aluminum, polyethylene, cotton
Liability
The manufacturer's liability will become
void if the product is not used as
intended. Please also refer to the
corresponding safety information and
instructions in this manual.
Disposal
The product can be disposed of in the
domestic waste.
Your medi team
wishes you a quick return to full fitness.
English