vivi M026TGB Manual De Usuario página 17

6.3.3.2 When the battery is at the key position 2, the
battery will be "unlocked" and the battery can
be removed from the frame. Before moving or
riding, remove the battery from bike, hold the
key and slide down the battery from base.
6.4 Bike startup
6.4.1 When the battery is locked on the frame, turn on the battery switch. Then, long
press the
the electric bike is at the power-on state.
Pure electric bike (pure electric mode): Rotate the Throttle lever (right handlebar)
6.4.2
inward (anticlockwise), start the bike, adjust the rotating angle of speed control
handlebar from small to large, and the speed is changed from slow to fast. The
speed can be adjusted by adjusting the tap position.
6.4.3 Bike assisted by pedal (boost mode): Step on the pedal. As the dish of chain
wheel rotates, the motor will be started.
6.5 Speed
6.5.1 Long press the "M" button of the Meter panel for two seconds to power on, and
adjust the speed to the "high" position;
6.5.2
Long press "+" and "-" for 3-5 seconds simultaneously to release the speed limit;
6.5.3
To restore the factory configuration after releasing speed limit, repeat Step 1 and
2.
Mode
Default mode (speed limit)
Customer mode (speed limit
release)
button of the Meter panel for 2 seconds to power it on. At this time,
Indicator off
0km/h
0km/h
1
low mid
15km/h 20km/h
15km/h 20km/h
2
high
25km/h
32 km/h
13