Publicidad
Idiomas disponibles
Idiomas disponibles
The completed blower tube should look like Figure 6.
Zip Tie
Throttle Cables
Upper Blower Tube
First Lower
Blower Tube
Second Lower
Blower Tube
Nozzle
WARNING:
To avoid serious personal injury, make
sure that all four parts of the blower tube are locked in
place or firmly installed.
ASSEMBLY INSTRUCTIONS
Elbow Tube
Hose Clamp
Flex Tube
Hose Clamp
On/Off Switch
Throttle Grip
Fig. 6
Secure the Throttle Cables
Place a zip tie around the elbow tube and the throttle cables (Fig.
7) as shown, making sure not to crimp the cables.
Zip Tie
Adjusting the Handle
1.
Rotate the throttle grip counterclockwise around the blower
tube until it is pointing directly downward (Fig. 8, A).
WARNING:
Do not rotate the handle clockwise to
adjust. This may cause the throttle cables to
disconnect from the throttle grip or the engine.
A
2.
Pull or push the throttle grip along the handle tube until its
distance from the backpack blower is comfortable (Fig. 8, B).
3.
Align the throttle grip with the slot closest to the comfortable
place and rotate the throttle grip clockwise into the upright
position (Fig. 9).
Zip Tie
Fig. 7
B
Fig. 8
Fig. 9
7
Publicidad
