Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
9.
Optical
Device
Join each cable according to the numbers of the picture on
the first page. Lead away the cables where the devices will be
placed. (E.g the center console or in the glove compartment).
Use the grommet when you are leading the cables through
the plastic parts.
10/a.
10/b.
For watching videos from your 5G iPod on the display of
thecar /if possble/ or any other displays, connect the
standardRCA video output #6 of the Gateway 500 to it. (Video
cable is not included in the package.)
4
This will give some additional
protection to the optical fibre and
help to prevent clatters when the
car is moving.
Ice>Link Gateway 500 MOST
The AUX box and the clips from kit #3 and #4 can be
assembled to a connector port, or you can use some of them
separately (see figure #11).
11.
Configuration
To utilize the potential of Gateway 500 best, some
configuration is necessary as a part of the installation.
See more information in Knowledge Base at:
http://support.dension.com
On non-text capable head units no further
configuration is necessary, the factory default
setting should be used.
menu will appear on the display. Select the configuration
mode according to the head unit type. Choose one item for
playing as it is written in the manual of your audio system. To
confirm the selection, press
press
.
V1.0X
After Gateway 500 was
successfully installed and
it is working, switch the
mode selector switch six
times (3 times on/off)
rapidly and a configuration
on it. To discard the selection
Publicidad
