Adjusting The Throttle Cable - DEFYGRAVITY SHERCO TY125 Manual De Propietario

Adjusting the throttle cable

A
C
The throttle cable play is factory set, although the
user can also adjust it:
To access the throttle cable adjustment shaft, the
B
seat will first have to be removed (Seat Sect.).
After adjustment, start the engine and turn the
handlebar to both sides to make sure there are no
accelerations produced by the cable being too tight.
The throttle cable should NEVER be under tension
when closed.
The throttle twist grip should have a free play of 2
to 3 mm.
- Remove the fuel tank
- Loosen the locking nut
- Screw the threaded shaft in or out
- Lock the position with the locknut
WARNING
WARNING
by pulling it backwards.
A
.
B
.
C
.
B
59 59