Checking And Topping Up The Engine Oil - DEFYGRAVITY SHERCO TY125 Manual De Propietario

B

Checking and topping up the engine oil

A
B
68 68
Maintenance processes
If the machine is ridden on dirt roads, the time
scheduled on the maintenance table for changing
the filter must be reduced.
The air filter should be lightly smeared with oil.
The oil level is checked using the dipstick attached
to the filler plug located on the right-hand side of the
crankcase.
The filler plug dipstick incorporates MIN and MAX
marks for checking the oil level.
This operation must be carried out with the engine
switched off but still warm.
To inspect it correctly, make sure the motorcycle is
in an upright position.
To check the level:
Topping up with oil:
- Top up with oil if necessary.
- Refit the oil plug
Type of oil: SAE 10-40
The engine oil level must be between the MIN and
MAX marks
WARNING
WARNING
- Unscrew the threaded plug
- Clean the dipstick .
B
- Screw the plug in fully.
A
- Remove the plug once again.
A
- Check the oil level on the marks on the dipstick
.
A
WARNING
.
B
.
A
B
.