Metra 95-5702 Instrucciones De Instalación página 4

Attention! The ashtray will not be able to be
reinstalled into the vehicle after these steps
have been performed.
To the radio dash panel:
1. Remove (4) T-20 Torx screws securing
the pocket, then remove the pocket.
(Figure A)
2. Remove (2) 5.5mm screws securing
the ashtray bracket, then remove the
bracket. (Figure A)
3. Unscrew the cigarette lighter and
remove.
4. Place the cut template over the ashtray/
pocket area. (Figure B)
Continued on the next page
4
KIT PREPARATION
(Figure A) (Figure B)
386.257.1187
|
MetraOnline.com