Metra 95-5702 Instrucciones De Instalación página 6

1. Secure the radio brackets to the radio
dash panel using the factory pocket
screws. (Figure A)
2. Slide the radio into the bracket/panel
assembly through the back, then secure
it using the screws supplied with the
radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash, then
route them to the new radio area.
Complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra. Test
the radio for proper operation.
4. Reassemble the dash in reverse order of
disassembly.
5. Snap the pocket into the old radio cavity
to complete the installation. (Figure C)
6
KIT ASSEMBLY
(Figure A) (Figure B) (Figure C)
|
386.257.1187 MetraOnline.com