Publicidad
Idiomas disponibles
Idiomas disponibles
The completed blower tube should look like Figure 6.
Throttle Cables
Upper Blower Tube
Throttle Grip
First Lower
Blower Tube
Second Lower
Blower Tube
Nozzle
WARNING:
To avoid serious personal injury, make
sure that all four parts of the blower tube are locked in
place or firmly installed.
ASSEMBLY INSTRUCTIONS
Elbow Tube
Hose Clamp
Flex Tube
Hose Clamp
On/Off Switch
Cruise Control
Fig. 6
Secure the Throttle Cables
Place a zip tie around the elbow tube and the throttle cables (Fig.
7) as shown, making sure not to crimp the cables.
Zip Tie
Adjusting the Throttle Grip
1.
Move the throttle grip to a location on the upper blower tube
that is comfortable for you (Fig. 8).
A
2.
Using a Torx T-20 Torx screwdriver, tighten the two screws at
the bottom of the throttle grip (Fig. 9).
Zip Tie
Fig. 7
Throttle Grip
Upper Blower Tube
Fig. 8
Fig. 9
7
Publicidad
