Urbanista COPENHAGEN Manual página 4

U S E R M A N U A L ( E N )
URBANISTA COPENHAGEN
Thank you for choosing an Urbanista product.
POWER ON AND OFF
The earphones automatically power on and off as you open and
close the charging case lid. Five minutes of disconnect or 30 minutes
of inactivity will automatically power off. If your earphones are
automatically powered off outside the charging case, you can press the
left and right sides separately for 5 seconds to power them on.
FIRST-TIME PAIRING AND RECONNECTING
Open the charging case lid to initiate first-time pairing. The LEDs will
first indicate the charging case battery level, followed by simultaneous
flashing to indicate pairing mode. Go to the Bluetooth settings on your
device and select "Urbanista Copenhagen" to connect. The LEDs will
stop flashing as the earphones successfully connect. The earphones
will automatically try to reconnect to the last connected device every
time they are powered on.
CONNECT TO ANOTHER DEVICE
Disconnect the earphones from your device to enter pairing mode
again. The earphones can store up to six paired devices.
TOUCH CONTROLS
Use the double- and triple-tap commands to control music and calls.
Left and right side long-press can be customized through the Urbanista
Audio app.
• Play/Pause: Double-tap left or right side.
• Previous song: Triple-tap left side.
• Next song: Triple-tap right side.
• Answer/Hang-up: Double-tap left or right side.
• Reject a call: Long-press left or right side.
• Activate voice assistant: Long-press left side.
RESET
Should the earphones fail to connect, be unstable or unresponsive,
please follow the below steps:
1. Put the earphones back in the charging case and close the lid.
Reopen after 10 seconds to pair or reconnect to your device.
4