Urbanista COPENHAGEN Manual página 5

U S E R M A N U A L
Should the problem persist, please follow the below steps for a full
reset:
2. Delete "Urbanista Copenhagen" from the Bluetooth settings on your
device.
3. With the earphones in the charging case, press the reset button (2)
for 10 seconds until the LEDs turn solid. The earphones will restart
and initiate pairing mode.
4. Follow the instructions in "First Time Pairing and Reconnecting" to
reconnect to your earphones.
THE URBANISTA AUDIO APP
The Urbanista Audio app is the perfect companion for your Urbanista
Copenhagen earphones, available for both iOS and Android. The app
allows you to customize features and personalize the way you use and
experience your Urbanista products.
CHARGING AND BATTERY
The earphones will automatically start charging when put back into the
charging case. A "low battery" voice prompt will notify you when there
are 30 minutes of playtime remaining, after which the earphones will
automatically turn off.
Use the included USB Type-C cable connected to a power source
to charge the case. The "Battery Status Indicator" (1) will pulse
during charging and continuously lit when the case is fully charged.
• 0-25 % - The first LED pulses white.
• 25-50 % - The first LED is lit and the second pulses white.
• 50-75 % - The first two LEDs are lit and the third pulses white.
• 75-100 % - The first three LEDs are lit and the fourth pulses white.
• 100 % - All four LEDs are lit continuously.
TROUBLESHOOTING
If you have any additional questions, please visit our online help center
where you will find our FAQs and an online version of this manual:
https://support.urbanista.com/
( E N )
5