BYK haze-gard i Family Instrucciones Resumidas página 11

BYK-Gardner GmbH
7 Continuous Mode
Measure sample repeatedly and check results immediately on display.
1. In the main menu select Configuration.
2. In the Configuration screen activate the option Continuous Measurements.
3. Go back to main menu and select the new icon Continuous Measurements.
4. Only single scales can be measured - select required scale.
5. Press the Measure button to start continuous mode.
6. Scale Haze requires a Transmittance reference, which is taken at the first measure-
ment and can be updated by selecting Take new reference.
7. For any new haze sample renew the reference before measuring.
8. To end Continuous Measurement mode, select the Home icon.
NOTICE
This mode is used to check a samples on many different positions. No results are saved.
293 026 162 - 2210
haze-gard i Family
11