Control Panel And Features - Sears Kenmore 2600 010 Serie Manual De Uso Y Cuidado

CONTROL PANEL AND FEATURES
S_ns_ng
Was_
R_nse
Spln
Cycle Complete
Lid Locked
Heavy Dut Delicates
Whites
1 o,[ ....
Rinse/Spin Warm Heavy High
Cool Normal
)rain/Spin
Cola Light No Spin
Clean @
Washer
POWER START/PAUSE
High Efficiency
low water wash 1ethnology Ur4LOCK LID I_
_' O J
',., j
Q WASH CYCLE KNOB
Use the Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load,
See "Cycle Guide" for detailed descriptions of cycles.
CYCLE OPTIONS
When you select a cycle, its default options will light up.
NOTE: Not all cycles, options, and modifiers are available
on all models. You may also add or remove options for each
cycle. Not all options can be used with all cycles, and some
are preset to work with certain cycles.
FABRIC SOFTENER
This option must be selected if using fabric softener
during a cycle. It ensures that fabric softener Js added
at the correct time in the rinse for even distribution.
NOTE: Press and hold FABRIC SOFTENER for 6 seconds
to turn cycle signal on or off:.
2ND RINSE
This option can be used to automatically add a second
rinse to most cycles.
NOTE: Press and hold 2ND RINSE for 6 seconds to turn
button sounds on or off:.
CYCLE MODiFiERS
When you select a cycle, its default modifiers will light up.
Not all cycles, options, and modifiers are available on all
models.
WASH TEMP
Temperature Control senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following the
garment label instructions, use the warmest wash water
safe for your fabric.
Warm and hot water may be cooler than what your
previous washer provided.
Even in a Cool water wash, some warm water may
be added to the washer to maintain a minimum
temperature.
SOiL LEVEL
Soil level (wash time) is preset for each wash cycle.
For most loads, use the soil level that is preset with
the cycle you have chosen. For heavily soiled and sturdy
fabrics, press SOIL LEVEL to select more wash time,
if needed. For lightly soiled and delicate fabrics, press
SOIL LEVEL to select Jess wash time, Jf needed. Lower soil
level setting wJJJ help reduce tangling and wrinkling.
SPiN SPEED
This washer automatically selects the spin speed based
on the cycle selected. The preset speeds can be changed.
Not all spin speeds are available with all cycles.
Faster spin speeds mean shorter dry times, but may
increase wrinkling Jn your load.
Slower spin speeds mean Jess wrinkling, but wJJJ leave
your load more damp.
O
CYCLE STATUS LIGHTS iNDiCATOR
The Cycle Status Lights show the progress of a cycle. At each
stage of the process, you may notice sounds or pauses that
are diff:erent from traditional washers.
SENSING
Sensing
When the START/PAUSE/UNLOCI< Wash
LID button is pressed, the washer will
Rinse
first perform a self=test o n the lidJack
mechanism. You willhear a click, the spio
basket will make a slight turn_ and the lid Cyol_ Complete
will unlock briefly before locking again. LidLocked
Once the lid has locked the second time,
the washer will use short, slow spins to estimate the load
size. These sensing spins may take 2 to 3 minutes before
water is added to the load and you may hear the hum
of these spins, if the sensing light is on, then washer is
working properly. You wJJJhear the motor turn the basket
in short pulses to thoroughly wet the load. The washer will
then move the load briefly, pause to allow water to soak
in to the load, and resume adding water. This process may
repeat until the correct amount of water has been added
for the load. You may also hear water flowing through the
dispenser, adding detergent to the load.
NOTE: Avoid opening the lid during sensing. The sensing
process will start over when the washer is restarted. The
sensing light may also come on during the Wash portions
of the cycle. This is normal.