Sears Kenmore 2600 010 Serie Manual De Uso Y Cuidado página 6

WASH
Sensing
You will hear the motor and washplate Wosh
moving the load. Unlike traditional
Rinse
washers, the load is not covered with water.
Low-water cleaning means concentrated Spi0
cleaning. Rather than diluting detergent CydeComplete
as done in an agitator-style washer, this UdLo0ked
washer delivers the detergent directly to
the soils. The motor sounds may change at
different stages in the cycle. The wash time
is determined by the selected soil level.
RINSE
Sensing
You will hear sounds similar to the wash Wosh
cycle as the washer rinses and moves the
load. You may hear the motor turning on R_nse
briefly (short hum) to move the basket while Spin
filling. Fabric softener will be added if the Cycle Complete
Fabric Softener option was selected. Some UdLocked
cycles use spray rinsing.
SPIN
The washer spins the load at increasing
speeds for proper water removal, based
on the selected cycle and spin speed.
Sensing
Wash
Rinse
Spin
Cycme Complete
Lid Locked
CYCLE COMPLETE
Once the cycle iscomplete, this light will come
on. Remove the load promptly for best results.
Sensing
Wash
Rinse
Spin
Cycle Complete
Lid Locked
LID LOCKED
Sensing
To allow for proper load sensing and spinning, Wosh
the lid will lock and the Lid Locked light will turn
R_n_e
on. This light indicates that the lid is locked and
cannot be opened. Spin
Cycle Complete
Lid Locked
If you need to open the lid, press START/PAUSE/
UNLOCK LID. The lid will unlock once the washer
movement has stopped. This may take several
minutes if the load was spinning at high speed.
Press START/PAUSE/UNLOCK LID again to
resume the cycle.
@
START/PAUSE
UNLOCK LID
6