Publicidad
Hardware Usage Guide
HOW TO USE A TWIST-LOCK
1.
Push a TWIST-LOCK® FASTENER
into the large hole in the part.
Step 1
å
Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å
To begin assembly, push six SAUDER TWIST-LOCK®
FASTENERS (36F) into the large holes in the LEFT END (B)
and FIXED SHELF (D).
å
Insert two WOOD DOWELS (15F) into the LEFT END (B).
15F
Do not tighten the TWIST-LOCK® FASTENERS in this step.
www.sauder.com/service
FASTENER
®
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
426910
2.
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
B
Dowel end
2
36F
36F
D
Page 5
Publicidad
