Publicidad
Idiomas disponibles
Idiomas disponibles
Table 4
RECOMMENDED SEPARATION DISTANCES BETWEEN PORTABLE AND MOBILE
RADIO COMMUNICATIONS EQUIPMENT AND THE CN200X SCOOTER
The CN200X Scooter is intended to operate in an electromagnetic environment in which RF disturbances
are under control. The client or user of the CN200X Scooter can contribute to preventing EM interference by
ensuring a minimum distance between the mobile and portable RF communications devices (transmitters) and
the CN200X Scooter battery charger during charging and the entire CN200X Scooter during its operation
as recommended below, in relation to the maximum output power of the radio communication devices.
TESTS
SEPARATION DISTANCE AS A FUNCTION OF THE FREQUENCY OF THE TRANSMITTER (M)
During battery
Maximum
charging
rated output
power of
from 150 kHz
transmitter
to 80 MHz
(W)
d=[3,5/V1]√P
0.01
0.35
0.1
1.1
1
3.5
10
11
100
35
For transmitters whose maximum rated output power is not listed above, the recommended separation distance
d, in metres (m), can be calculated using the equation applicable to the transmitter frequency, where P is the
maximum rated output power of the transmitter, in Watt (W), as given by the transmitter's manufacturer.
NOTE 1: At 80 MHz and 800 MHz, apply the separation distance for the higher frequency band.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation
is affected by absorption and reflection from structures, objects and people.
During use of
During
the CN200X
battery
Scooter
charging
from 150 kHz
from 80 MHz
to 80 MHz
to 800 MHz
d=[3,5/V1]√P
d=[3,5/E1]√P
0.35
0.35
1.1
1.1
3.5
3.5
11
11
35
35
During use of
During battery
the CN200X
charging
Scooter
from 80 MHz
from 800 MHz
to 800 MHz
to 2.5 GHz
d=[3,5/E1]√P
d=[7/E1]√P
0.35
0.7
1.1
2.2
3.5
7
11
7.3
35
70
9
During use of
the CN200X
Scooter
from 800 MHz
to 2.5 GHz
d=[7/E1]√P
0.7
2.2
7
7.3
70
Publicidad
