Installing your appliance
•
This appliance should be placed in a well ventilated, dry room.
•
Position it in a place with sufficient strength to support its weight when
loaded. To ensure that it is level,adjust the height of the feet underneath.
•
To get the best from your appliance with the lowest energy consumption, do
not place the appliance close to a heat source (heater, cooker, etc.), do not
expose it to direct sunlight, and do not place it in a room which is too cold.
•
Plug the appliance into an exclusively, easily accessible plug socket. Any
questions power and /or grounding should be directed toward a certified
electrician or an authorized service centre.
•
To prevent the appliance from heating up, ensure adequate ventilation and
never block or cover the air vents.
Note: Make sure that the socket and ON/OFF switch are easily accessible after the
appliance has been installed.
EN
35