Haier MRV 5 Instrucciones De Instalación página 29

INSTALLATION INSTRUCTIONS
Electric Wiring and Applications Cont.
Power Line Installation Instructions
NOTE: Please leave enough slack in the electrical wiring for the electrical control panel to be easily opened.
• For maintenance, remove the five screws from the electrical panel cover and rotate open. Use the light cable to secure
the door.
Remove the 5 mounting screws and lift the control cabinet up gently to remove the slots on the control cabinet from the hooks of the
installation plate before servicing. Take use of the thin metal staff with hook to suspend the control cabinet and keep it open by fixing
the hook to the proper suspension slot as illustrated bellow. Return the metal staff back and secure the covers when completed.
Left Column
A
B
Power wiring from the unit disconnect must have sufficient length to allow the control panel assembly to swing open. The main power
conductors L1/L2/ L3 need to be clamped and secured in place so that outside forced cannot pull the wires out of the terminal block.
Make sure the communication line is also clamped and secured.
C
31-5000573 Rev. 2
Suspension slot for unit with
double fans
Suspension slot for unit with
single fans
A
B
C
29