Powerhorse PPW2300 Manual Del Operador página 14

EN
PROBLEM
The motor buzzes,
but the machine
does not start.
There is no water.
8 TECHNICAL DATA
Universal Motor
Max. Pounds Per Square Inch
Pressure
Rated Gallons Per Minute
Maximum Inlet Water Tem-
perature
Cleaning Units
Weight
Detergent injection rate
POSSIBLE SOLUTION
CAUSE
The supply volt- Make sure that on-
age is low. ly the pressure
washer is running
on the circuit.
The pump system 1. Turn "OFF"
has residual pres- the machine.
sure.
2. Pull the spray
gun trigger on
spray wand to
release pres-
sure.
3. Turn the ma-
chine "ON".
Voltage loss due to Disconnect the ex-
use of an improper tension cord, and
extension cord. connect the ma-
chine directly into
the outlet.
Pressure washer Call customer
not used for long service.
periods.
Residual friction 1. Disconnect the
among compo- water supply.
nents. Unit might
2. Power "ON"
emit a humming
the machine
noise.
for 2 to 3 sec-
onds.
3. Repeat the
above step a
couple of
times or until
the motor
starts.
The water supply Turn the water
is off. supply on.
The garden hose is Remove kink in
kinked.. garden hose.
120V~ 60 Hz, 14 Amps
2300 PSI
1.2 GPM
104 °F (40 °C)
2760 C.U.
41.2 lbs. (18.7 kg)
3%~12%
English
9 LIMITED WARRANTY
Northern Tool and Equipment Company, Inc. ("We'' or ''Us'')
warrants to the original purchaser only (''You'' or ''Your'') that
the Powerhorse product purchased will be free from material
defects in both materials and workmanship, normal wear and
tear excepted, for a period of two years from date of
purchase. The foregoing warranty is valid only if the
installation and use of the product is strictly in accordance
with product instructions. There are no other warranties,
express or implied, including the warranty of merchantability
or fitness for a particular purpose. If the product does not
comply with this limited warranty, Your sole and exclusive
remedy is that We will, at our sole option and within a
commercially reasonable time, either replace the product or
product component without charge to You or refund the
purchase price (less shipping). This limited warranty is not
transferable.
Limitations on the Warranty
This limited warranty does not cover: (a) normal wear and
tear; (b) damage through abuse, neglect, misuse, or as a result
of any accident or in any other manner; (c) damage from
misapplication, overloading, or improper installation; (d)
improper maintenance and repair; and (e) product alteration
in any manner by anyone other than Us, with the sole
exception of alterations made pursuant to product instructions
and in a workmanlike manner.
Obligations of Purchaser
You must retain Your product purchase receipt to verify date
of purchase and that You are the original purchaser. To make
a warranty claim, contact Us at 1-866-915-9824, identify the
product by make and model number, and follow the claim
instructions that will be provided. The product and the
purchase receipt must be provided to Us in order to process
Your warranty claim. Any returned product that is replaced or
refunded by Us becomes our property. You will be
responsible for return shipping costs or costs related to Your
return visit to a retail store.
Remedy Limits
Product replacement or a refund of the purchase price is Your
sole remedy under this limited warranty or any other warranty
related to the product. We shall not be liable for: service or
labor charges or damage to Your property incurred in
removing or replacing the product; any damages, including,
without limitation, damages to tangible personal property or
personal injury, related to Your improper use, installation, or
maintenance of the product or product component; or any
indirect, incidental or consequential damages of any kind for
any reason.
Assumption of Risk
14
Double-insulated construc-
tion.