Powerhorse PPW2300 Manual Del Operador página 8

EN
3.6 INSTALL THE POWER CORD
STORAGE ARM
3
1. Attach the power cord storage arm (13) onto the fixture.
2. Align the screw (15) with the hole in the power cord
storage arm (13).
3. Push the screw (15) through and tighten it.
3.7 INSTALL THE UPPER HANDLE
1. Push and hold the handle lock button (19) on the upper
handle (18).
2. Move the upper handle (18) into the lower handle (21)
until the handle lock button (19) clicks through the slot
(20).
English
13
18
19
20
21
8
3.8 INSTALL THE WHEELS
1. Place axle (24) through the wheel and handle frame.
2. Place washer (23) onto the axle (24).
3. Insert cotter pin (22) through the hole of the axle (24).
3.9 INSTALL THE SPRAY WAND
5
1. Push the end of the spray wand (5) into the gun handle
(1).
2. Turn the spray wand (5) clockwise until the tabs lock into
position.
WARNING
Make sure that the connection has no leakage.
3.10 INSTALL THE HIGH PRESSURE
HOSE
8
4
1. Push and turn clockwise one end of the high pressure
hose (4) into the inlet coupler (9).
23 24
22
1
9