Crosscall X-SCAN Manual De Instrucciones página 17

Idiomas disponibles

• Do not allow children or pets to chew or lick the device.

• Do not use harsh cleaning agents or solvents such as petrol or alcohol:

risk of damage.

• Be careful with the edges, uneven surfaces, metal parts of this device and

its packaging to avoid possible injury or damage.

• Do not modify, repair or disassemble this device. Doing so may result in

fire, electric shock, or complete destruction of the device. None of this is

not covered by the warranty.

• Do not attempt to change a part by yourself. If a part needs to be changed,

contact your dealer.

• This device is not intended for use by persons (including children) with

reduced physical, sensory or mental capacities, or persons without

experience or knowledge, unless they are supervised by a person

responsible for their safety or have received prior instructions concerning

the use of the device. Children should be supervised to ensure that they

do not play with the device.

PRECAUTIONS FOR USE AND WATERPROOFING

• The X-SCAN is only waterproof when the product is properly attached to

the phone using the dedicated X-BLOCKER

• To guarantee the waterproofing of the X-SCAN, check that it is not

damaged and that the seal at the X-LINK™* is in good condition.

• If the device gets wet with salt water or chlorinated water, wipe it with a

damp cloth, then dry with a soft, clean cloth.

• If the device gets wet, dry it with a soft, clean cloth.

• Do not use the X-SCAN underwater.

• Do not immerse the X-SCAN in water.

•

Do not remove any parts of the X-SCAN, and do not use any tools that

may damage (sharp, pointed, etc.) and/or compromise its waterproofing.

Class 1 laser: Recommendations for use

• Do not look directly at the source of the laser

• Do not point the laser into your eyes

• Do not direct the laser into the eyes of a person or an animal

• Do not point the laser onto a reflective material

• If the window of the X-SCAN is damaged, do not use the product as the

laser trajectory may be changed