Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 10
Insert the shaft through the
center of the shelves to the
bottom positioning hub
(See Figure 9).
STEP 11
Turn the smaller upper shaft
slightly (1/2 a turn) counter
clockwise to loosen the shaft,
then extend the shaft to the
upper universal bracket (See
Figure 10).
STEP 12
Once placed in the upper
universal bracket, turn the
upper shaft clockwise to lock
the shaft into place. Rotate
the bottom shaft to line the
shaft notch with the bottom
universal bracket
(See Figure 11).
STEP 13
Once completed, raise the
shelf to the desired height
along with the positioner base
w/set screw, then tighten the
set screw (See Figure 12).
#2
#2
#3
4
FIG. 9
FIG. 11
Customer Service: 800-626-1126 | rev-a-shelf.com
FIG. 10
FIG. 12
Publicidad
