Publicidad
Idiomas disponibles
Idiomas disponibles
Operation instruction
Control panel
7000
Power:
Press the POWER keypad to turn the
unit on/off. (The TIMER keypad
controls the auto start/stop feature of
the unit.)
Mode: Press the "MODE" keypad to
select the appropriate operating
mode. Select the operating mode from
COOLING, FAN and DRY. The
indicator light beside the "MODE"
option will illuminate, identifying the
mode selected.
35
All manuals and user guides at all-guides.com
When using the DRY and AUTO
mode, you cannot select a fan speed.
The fan motor operates on LOW
speed in DRY mode and on MED
speed in AUTO mode.
Dry (some models):
This mode is used to decrease the
humidity in the room.
Cooling:
The temperature setting are
adjustable between 16 °C to 31 °C.
Cooling begins automatically when
the room temperature is 1 °C above
the set point, and stops when the
room temperature is 1 °C below the
set point. The fan will not stop
running.
Temperature settings:
UP: Press the
keypad to
increase the set (operating)
temperature of the unit. Each time the
keypad is pressed the temperature
increases as follows: 1 °C (Celsius
Scale) Maximum Setting 31°C.
DOWN: Press the
keypad to
decrease the set (operating)
temperature of the unit. Each time the
keypad is pressed the temperature
decreases as follows: 1 °C (Celsius
Scale) Minimum Setting 16 °C.
Fan:
Press this keypad to activate the
appropriate fan speed setting. Each
depression of the keypad will
Aumentar
Bajar
36
Publicidad
