Publicidad
Idiomas disponibles
Idiomas disponibles
Installation steps
Step 1:
Remove the front panel and the air
filter.
1. Hold the slot under the front panel,
then uplift it outwards, and remove
the front panel (See Fig.1).
2. Pinch the handle under the air
filter and make the air filter arched,
remove it from the slot from
underside to upside (See Fig.2).
Step 2:
Remove the frame.
1. Remove the two fixing screws
from the frame (See Fig.3).
2. Grasp the left corner of the
frame's underside, release the
coupler plugs, then loosen the
frame (See Fig.4).
Step 3:
Installation.
1. Remove the two fixing screws on
the chassis fixing brackets, then
remove the chassis fixing brackets
(See Fig.5).
47
All manuals and user guides at all-guides.com
Fig. 1
Fig. 2
7
Fig. 3
Fig. 4
Fig. 5
2. Grasp the handle on the chassis
and carefully slide the air
conditioner out of the cabinet (See
Fig.6).
3. Remove shipping pad from around
compressor before operation and
make sure the discharge points to
the drain pan are aligned before
the chassis is pushed into the
cabinet (See Fig.7).
4. Push the unit chassis into the
cabinet (See Fig.8).
5. Install the two chassis fixing
brackets using the two fixing
screws (See Fig.5).
Step 4:
Install the frame.
1. Install the frame and connect the
coupler plugs, making sure not to
interfere with the temperature
sensor cable (See Fig.9).
2. Fix the screws on the frame (See
Fig.3).
Step 5:
Install the air filter and front panel.
1. Install the air filter into the frame's
slot from upside to underside (See
Fig.2).
2. Hang the front panel on the frame's
buckle, then press the front panel
into the frame's slot until you hear a
click (See Fig10).
Fig. 6
Wall
Cabinet
Screews
Supporter
Fig. 7
Fig. 8
Fig. 9
Fig. 10
48
Publicidad
