Watts LF007 Serie Instrucciones De Instalación página 23

The three sensor voltages are displayed in the Analog Data Values section, fields #1, #2, and
#3. The data should read close to 0.5V.
Data entries in the Communication Status field (lower left) reflect polling of the interface module
input registers.
The data values can also be displayed as a numerical value. The utility software knows the plus
and minus full scale input limits for each channel. Uncheck Hex Data (lower left) to display the
numeric values.
The scanning process also logs and displays the highest (peak) and lowest (valley) readings
recorded during the scanning process. This is for indication purposes only.
A scan interval slide control is also provided to speed up or slow down the scanning process.
This slide control allows the channels to be scanned at intervals from 0.5 to 5 seconds.
Click Stop to terminate scanning.
23