Descargar Imprimir esta página

VITO PRO-POWER VIBCASFL20 Manual De Instrucciones página 24

Publicidad

Idiomas disponibles

Idiomas disponibles

ASSEMBLY INSTRUCTIONS
Battery assembly
1. Insert the battery into the fitting placed in the handle
(6) and press the battery until you hear the "click noise"
of the battery lock/unlock button (8). At this point the
battery is completely secured;
2. To remove, press the Battery lock/unlock button and
pull out the battery;
For best results, make sure the battery is fully charged
before using it.
Only use VITO 20V lithium batteries.
Battery charging
1. Place the battery in the charger as if you placed it in
the reciprocating saw;
2. Plug the charger plug into the socket and let it charge.
Sometimes at the end of charging, both the battery and
the charger may be hot, which does not mean that they
are malfunctioning.
Allow the battery to cool down before putting it in the
machine.
Accessories assembly/replacement
Remove the battery before installing or changing
accessories.
1.
Pull the drill chuck (1);
2.
Insert the accessory, making sure it is secure;
3.
To remove, do the same procedure.
OPERATING INSTRUCTIONS
When working with the cordless screwdriver, you
should consider some precautions and operating
procedures:
▪ Hold the screwdriver with both hands.
control of the screwdriver can cause serious injury;
▪ When working on loose or small parts, use fixing
devices to secure the parts securely and securely;
24
▪ Do not apply excessive pressure to the screwdriver
against the workpiece/object. If the speed decreases
abruptly, reduce the pressure on the screwdriver
immediately;
▪ When the application tool locks, immediately switch
off the tool. Avoid the high reaction torques that
cause the tool to recoil;
▪ Never put the screwdriver down until the rotary tool
has come to a complete stop;
▪ Wear hearing protection when using the screwdriver.
Exposure to noise may cause hearing loss;
▪ Switch the screwdriver off immediately if any of the
following problems occur:
- Leakage of lubricant through ventilation holes;
- Damage to the screwdriver housing;
- Damage to the "ON/OFF" switch;
- Appearance of smoke or characteristic burning smell;
Shaft direction of rotation
Do not select the Forward/reverse switch while the
screwdriver is in operation, as this may cause serious
damage to the screwdriver. Always check the direction
of rotation before starting to use the screwdriver.
1.
Use the Forward/reverse switch (2) to select the
direction of rotation of the shaft:
▪ With the Foward/reverse switch on the left, the shaft
rotates clockwise;
▪ With the Foward/reverse switch on the right, the
shaft rotates counterclockwise;
Starting and stopping the cordless screwdriver
1. Select the desired direction of rotation;
2. Press the "ON/OFF" switch (7);
3. To increase and decrease the speed, press or release
the "ON/OFF" switch. The maximum speed is reached
Loss of
with the switch fully pressed;
4. To turn the screwdriver off, release the "ON/OFF"
switch.

Publicidad

loading