VITO PRO-POWER VIBCASFL20 Manual De Instrucciones página 26

FREQUENTLY ASKED QUESTIONS / TROUBLESHOOTING
Question/Problem - Cause
The screwdriver doesn't switch on when you press
the" on/off" switch:
• Discharged battery;
• Switch connections are not in good condition or
switch does not work;
The" on/off" switch is blocked:
• The Forward/reverse switch is center positioned;
Engine emits abnormal sound, starts intermittently
or rotates slowly:
• Switch connections damaged;
• Mechanical obstruction;
• Screwdriver is under excessive pressure, engine
overloaded;
Body overheats:
• Machine overloaded;
• The housing or parts inside the brush cutter are
incorrectly assembled;
26
Solution
• Charge the battery;
• Repair or replace the switch;
• Select the direction of rotation;
• Repair or replace the switch;
• Inspect the mechanical components;
• Reduce the pressure;
• Reduce working pressure;
• Check whether there is any blockage or parts
touching the blade;