Descargar Imprimir esta página

Dreame V11SE Manual Del Usuario página 9

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46
How to Use
EN
If you need to pay attention to any abnormality during the use of the product, a
prompt will be shown on the screen. You should follow the instructions on the screen
to keep the performance normal.
Air duct blocked
Check whether the dust
compartment, extension
rod, and soft roller nozzle
are blocked.
Replace the filter
Refer to the maintenance
guide [Cleaning HEPA
Filter] section to remove
the filter and replace it.
Low battery
Please charge as soon as
possible.
Battery overheating
Please wait and
continue to use after
motor temperature is
normal.
14
Clean the brush
Refer to the maintenance
guide [Soft Roller Nozzle]
section to clean the fiber
material and hairs
wrapped around the
roller brush.
Reset filter
Press and hold
for 5
seconds to enter the filter
reset countdown screen.
When
appears on the
screen, it indicates that
the reset is successful.
The battery runs out
Please charge as soon as
possible.
Error
Please contact our
after-sales service
department for
maintenance.
Care & Maintenance
Tips:
1.
Always use genuine parts to keep your warranty from becoming void.
2.
If the filter or nozzle becomes clogged, the vacuum will stop working shortly
after being turned on. To restore normal functions, clean the filter and/or nozzle.
3.
If the vacuum will not be used for an extended period, fully charge it, unplug
its power adapter, and store it in a cool, low-humidity environment away from
direct sunlight. To avoid over-discharging the battery, recharge the vacuum at
least once every 3 months.
Cleaning the Vacuum
Wipe the vacuum with a soft dry cloth.
Cleaning the Dust Cup
Before cleaning the dust cup, disconnect the adapter and keep the vacuum's power
switch in the off position. The vacuum's cleaning ability will be reduced if the dust
cup is filled to the "MAX" mark. To retain performance, remember to empty the cup.
1. Empty the dust cup: Press the release button on the bottom of the cup, then empty
its contents.
2. Clean the dust cup: Use a dry cloth or paper towel to wipe the dust from the inner
wall of the dust cup.
EN
15

Publicidad

loading