Schluter Systems DH E RT2/BW Manual De Instrucciones página 11

E2: External sensor disconnected, defective or short-circuited.
Reconnect the sensor if disconnected, or replace the sensor.
E5: Internal overheating. Inspect the installation.
MAINTENANCE
The thermostat is maintenance free.
Keep the thermostat's air vents clean and unobstructed at all
times.
The thermostat may only be cleaned with a dry cloth.
APPROVALS AND STANDARDS
Regulations
The manufacturer hereby declares that the product is in conformity
with the following directives of the European Parliament:
LVD - Low Voltage Directive
EMC - Electromagnetic Compatibility
RoHS - Restriction of the use of certain Hazardous Substances
RED - Radio Equipment Directive
Applied standards and approvals
According to the following standard:
EN 60730-1, EN 60730-2-9, EN 300 328, EN 301 489-17,
EN 301 489-1, EN 62479, EN 50559
Classification
Protection from electric shock must be assured by appropriate
installation. Must be installed according to the requirements of
Class II (reinforced insulation).
ENVIRONMENT AND RECYCLING
Protect the environment by disposing of the package in
compliance with local regulations for waste processing.
Recycling of obsolete appliances
Equipment containing electrical components must not
be disposed of along with domestic waste.
It must be separately collected together with electrical
and electronic waste in accordance with current local
regulations.
© 2020. All rights reserved. Used under license by Schlüter-Systems KG
English
11