GCE GS40A Instrucciones De Uso página 7

Ocultar thumbs Ver también para GS40A:

Idiomas disponibles

4.8. Setting of gas ﬂ ow using the gas saver GS40F:

Set the gas ﬂ ow by means of adjusting screw of the pressure regulator - for details - see an instruction

for use for the pressure regulators. Gas saver GS40F is preset by the manufacturer to 20 l/min and is not

further adjusted by the operator.

4.9. Setting of gas ﬂ ow using the gas saver GS40A:

Connect the pressure regulator according its instruction for use. Fully open the shut-oﬀ valve of the ﬂ ow-

meter (2) and keep it fully open for entire time operation. Set the required ﬂ ow by means of the adjusting

screw (4) and read the value indicated by the ﬂ owmeter of the pressure regulator (1B).

5. TERMINATION OF OPERATION

•

See Instruction for use of the Pressure regulators.

6. OPERATING AND MAINTENANCE INSTRUCTIONS

6.1. Protect the gas saver from damage (check visually at regulator intervals).

6.2. Ensure that gaskets, sealing surfaces and gauges are in good condition and free from marks.

6.3. If malfunction of the regulator (such as increasing outlet pressure at consumption= 0, leaking, de-

fective gauges or responding safety valve) is suspected put the gas saver out of operation and close the

cylinder valve immediately.

Do not under any circumstances undertake, or allow any repairs by unauthorised personnel.

7. REPAIRS

7.1. Repairs of the gas saver shall be carried out by competent personnel at an authorised Service or

Repair Workshop. Only genuine spares may be used.

7.2. Repairs or modiﬁ cations carried out by the user or a non-authorised third party will entail loss of

liability.

8. WARRANTY

The Standard Warranty period is two years from date of receipt by the Customer (or if this is not known

2 years from time of the product manufacture shown on the product). The standard warranty is only

valid for products handled according to Instruction for use (IFU) and general industry good practice and

standards.

Note: Pictures in this Instruction for use are illustrative only. They may di er from the real look of your

product!

7/40

Gs40f