Warm Audio WA-MPX Manual De Instrucciones página 6

TECHNICAL SPECS - REAR PANEL [SINGLE-CHANNEL]
1 2 3 4
1. IEC AC POWER INLET
Connect the accompanying power cord to power the unit.
2. Voltage Switch
Always use the correct rating (1 15v or 230v) that corresponds with local power requirements, as indicated by the red
voltage switch.
3. Balanced Line Outputs (XLR & TRS)
Balanced outputs are provided on an XLR and ¼" TRS connection for convenience.
4. Mic / Line Input
The back of the unit offers both Mic (XLR) and Line (TRS) balanced inputs for convenience. The mic input is designed for
dynamic, condenser and ribbon microphones. Other instruments or devices that put out a low level microphone signal
can also be plugged into this input. The line input is designed for line level instruments or sources that put out line level
signals such as some keyboards, electric instruments or audio interface outputs.
5