PNI Escort HP 446 Manual De Usuario página 13

Press the keys UP and DOWN to select one of the options:
ON - the function is enabled.
OFF - the function is disabled (default setting).
Offset direction setup
Press the key
Press the keys UP and DOWN to reach the menu 07 SHIFT.
Press the key
The repeater receives a signal (UP-LINK) on a frequency and transmits that
frequency (DOWN-LINK). The difference between the two frequencies
is called the offset frequency. If the UP-LINK frequency is higher than the
DOWN-LINK frequency, the offset direction is negative. If it is smaller, the
offset direction is positive.
Press the keys UP and DOWN to select one of the options:
+: indicates positive offset direction, which means that the transmitted
frequency is higher than the received frequency.
-: indicates negative offset direction, which means that the transmitted
frequency is lower than the received frequency.
OFF: the function is inactive (default setting).
Offset frequency setup
Press the key
Press the keys UP and DOWN to reach the menu 08 OFFSET.
Press the keys UP and DOWN to select the frequency.
0-70: Total 70 MHz frequency range available.
Default: 5.0MHz.
Nota: The offset frequency changes based on the frequency step setting.
Frequency step setup
Press the key
Press the keys UP and DOWN to reach the menu 09 STEP.
to access the menu.
to access the menu Offset direction setup.
to access the menu.
to access the menu.
User manual - 13