PERGOLUX SUNDREAM 3X3 Instrucciones De Montaje página 21

Instructions for operating the remote controller
Press ① to open slats
Press ② to stop slats
Press ③ to close the slats
Press ④ to turn lights on/off
Learning code:
1. Power the motor
2. Open the back cover of the remote controller and press and hold the
code key for more than 5 seconds
3. The motor will start beeping after 5 seconds.
4. After the motor has started beeping, press the "up" button on the remote
controller.
Deleting code:
1. Power the motor
2. Open the back cover of the remote controller and press and hold the
code key for more than 5 seconds with a needle.
3. The motor will start beeping after 5 seconds
4. After the motor has started beeping, press the "down" button on the
remote controller
21