HQ-Power MINI STARDUST I Manual Del Usuario página 7

Channel
5
o DMX512 Connection
Connect an XLR cable (not incl.) to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR
input of the VDPL1501MHS-B / VDPL1501MHS-W. Multiple VDPL1501MHS-Bs / VDPL1501MHS-Ws can be linked through
serial linking. The linking cable should be a two-core screened cable with XLR input and output connectors.
o DMX512 Chain with Termination
VDPL1501MHS-B / VDPL1501MHS-W_v4
Function
Gobo
A DMX terminator is recommended for installations where the DMX cable has to run a long
distance or is in an electrically noisy environment (e.g. discos). The terminator prevents
corruption of the digital control signal by electrical noise. The DMX terminator is simply an
XLR plug with a 120 Ω resistor between pins 2 and 3, which is then plugged into the XLR
output socket of the last device in the chain.
Please see illustration.
From To
8 21 White
22 34 Red
35 49 Green
50 63 Blue
64 77 Cyan
78 91 Magenta
92 105 Yellow
106 119 Purple
120 133 Orange
134 147 Chartreuse
148 161 Pink
162 175 Brown
176 189 Gold
190 203 Crimson
204 217 Violet
218 231 Grape
232 255 Colour change macro
0 7 Open
8 15 Gobo 1
16 23 Gobo 2
24 31 Gobo 3
32 39 Gobo 4
40 47 Gobo 5
48 55 Gobo 6
56 63 Gobo 7
64 71 Gobo 8
72 79 Gobo 9
80 94 Gobo 1 shaking (from slow to fast)
95 109 Gobo 2 shaking (from slow to fast)
110 124 Gobo 3 shaking (from slow to fast)
125 139 Gobo 4 shaking (from slow to fast)
140 154 Gobo 5 shaking (from slow to fast)
155 169 Gobo 6 shaking (from slow to fast)
170 184 Gobo 7 shaking (from slow to fast)
185 199 Gobo 8 shaking (from slow to fast)
200 214 Gobo 9 shaking (from slow to fast)
215 235 Positive Rainbow effect (increasing speed)
236 255 Negative rainbow effect (increasing speed)
7
Description
HQPOWER