Publicidad
Idiomas disponibles
Idiomas disponibles
GBR USER MANUAL
CAUTION
This User Manual contains information on the use and care of this product. Please read this user manual carefully before using the appliance and save it for future reference.
•
Before the first use, check the device specifications and the power supply in your network.
•
Use only for domestic purposes according to the instruction manual. It is not intended for industrial use.
•
For indoor use only.
•
Do not use the device with a damaged cord, plug or other damages.
•
Keep the power cord away from sharp edges and/or hot surfaces.
•
Do not pull the cord, always pull the plug. Do not reel the cord around the device housing.
•
Never attempt to dissemble and/or repair the item by yourself. If you encounter problems, please contact the nearest customer service centre.
•
Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the item.
•
Always unplug the device and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
•
To avoid electric shock and/or fire, do not submerge in water or other liquids. If this occurs, immediately unplug the device and contact your service centre for inspection.
•
This appliance is not intended to be used by persons (including children) with reduced physical, sensory or mental capabilities. Neither for persons with a lack of experience and/or
knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
•
Do not use the device for grinding solid products such as coffee beans or ice cubes
•
Switch off the appliance before changing the accessories.
•
Be careful when using sharp blades, avoid contact with the accessories during operation.
•
Incorrect assembly of the device may cause fire, electric shock or other injuries.
•
The maximum advised continuous operating time is 30 sec. Turn off the device and allow the engine to cool down for 1 min before the next cycle of 30 sec. After 4 cycles, we advise you
to allow the engine to cool down for 15 min before continuing.
BEFORE FIRST USE
• Unpack the appliance and remove all packaging materials and labels.
• Clean the housing with a damp cloth, clean the accessories in soapy water, rinse thoroughly and dry.
• Set the desired accessory, aligning the arrow on the accessory and an open lock icon on the handle, and turn it clockwise until it locks.
USING THE DEVICE
SPEED SELECTION
• Press speed mode button I to set medium speed
• Press speed mode button I I to set High speed
3
LU-1829
Publicidad
