Publicidad
4. Optimal Installation Height
The best installation height is around
2.5M or 8ft, which will optimize the motion
sensor performance.
5.1 INSTALLATION: Wall Mount (Built-in Junction Box)
For installation in Wall Mount or Eaves Mount Recessed Junction Box Applications.
STEP 1: Disconnect power supply.
Remove (2) plastic plugs. Remove
inserted (2) M5*12 screws, (2) M5 Flat
washers and mounting plate.
STEP 4: Secure fixture onto mounting
plate with inserted (2) M5*12 screws,
(2) M5 Flat washers and plastic plugs.
© Copyright 2022 Satco Products, Inc. 1/23, v2.5
STEP 2: Fix mounting plate and
gasket onto recessed junction box
with (4) #10-1inch screws.
STEP 5: Check fixture and connect
power supply.
2
STEP 3: Connect the wires
with (3) P3 Wire Nuts, refer to
the Wiring Diagram below.
Wiring Diagram
LINE
BLACK
NEUTRAL
WHITE
GROUND
GREEN
Fixture
Publicidad
