Publicidad
8. Get the APP and Account
Download the Starfish APP and set up your account
from the Apple App Store or Google Play Store.
You can also scan the QR Code below.
9. If the Security Floodlight is controlled by an in-wall switch, move the switch to the
ON position
NOTE: The switch must remain in the ON position to
function properly.
10. Set Up the Camera
• Power the device on and make sure the
indicator is red and flashing quickly or a
prompt tone is heard.
• If the indicator is not quickly flashing red,
press the reset button on the back of the
camera for 5 seconds, and then release.
The red LED should begin to blink.
• Follow App's instructions to complete
network pairing process, the device will
connect to your Wi-Fi network successfully.
• Once the blue LED light is on, the camera
is successfully paired and ready to be used.
11. Micro SD Card
• The camera includes a 32GB Micro SD Card that is pre-formatted.
• This camera is capable of using up to a 128GB Micro SD Card
for additional storage. To ensure the Micro SD Card can record
properly. We recommend a Class 10 or higher speed Micro SD
Card.
• The Micro SD Card must be formatted to FAT32, if that is not the
default formatting.
• Only insert or remove the SD card when power is removed from
the device, or else there is a risk of file corruption.
© Copyright 2022 Satco Products, Inc. 1/23, v2.5
In the back of the camera, press the
Reset button for about 5 seconds to
start Reset processing.
4
Launch the app from your smartphone
and click to register and then sign in.
Follow the on-screen instructions.
Publicidad
