LG GoldStar GWHD6500R Manual Del Propietário página 14

Ins_Ha#on
_ aution: During the following step, hold unit firmly until window sash
is Iower_ to top channel behind side panel frames. Personal injury or
property damage may result if unit falls from wind_,
i. Install the air conditioner in the win_w
1-1. Carefully li_ the air conditioner and
slide it into the open window,. Make
sure the bottom guide of the air
conditioner drops into the notches of
the L bracket.
: When the air conditioner drops
into the L bracket, the air conditioner
will be centered in window opening.
1-2. While steadying the air conditioner,
carefully bring the window sash
down behind the upper guide of the
air conditioner.
When the air conditioner is properly
installed, it should tilt slightly down at
the back. If it is set correctly in the
window, it will hang lower in the back
automatically.. If it does not, there is a
problem with the installation,.
2. S_ure the guide panels
Extend the guide panels (Type F) to
fill the window opening using 4
screws (Type B) to secure them.
3. Install the sash seal and _sh lock
3-1. Cut the sash seal (Type E) to the
window width. Stuff the sash seal
between the glass and the window
to prevent air and insects from
getting into the room.
3-2. Fasten the L bracket using a screw
(Type A).
3-3. Remove the screws that secure the
cabinet and base pan in the right
side.
L Bracket
Ty_
S_h Seal
(Ty_ E}
i4 Room Air Conditioner