Ega Master MASTERVISION MINI Manual De Instrucciones página 10

Please install the batteries tube and choose the accessory according to actual situation.
Steps of installation as following:
Install Batteries:
1. Using a screwdriver, remove screw and cover.
2. Remove battery compartment and insert four new AA batteries into the proper slots in the battery compartment. Proper battery
orientation is indicated on the battery compartment.
3. Reinstall battery compartment and battery cover and screw as before.
Note:
Dry your hands before installation or replacing batteries.
Install the camera with Flexible Tube
Connect the camera with tube to the body, make sure the keyed ends are properly aligned. Once they are aligned, finger tighten the
knurled knob to hold the connection in place.
The three included accessories, (mirror, hook and magnet) all attached to the camera by the same way. To install as following:
-10-
6. Installation