Ega Master MASTERVISION MINI Manual De Instrucciones página 11

Install Monitor for Wired Use
The product also supports wired use by connect the monitor to camera.
Connect Monitor Power
Connect the adapter to monitor, the power indicator will lights on red or the battery capacity icon on LCD of monitor will twinkle
which indicates being charging, and will turn off after a full charge:
Video Output
Insert the video cable into the VIDEO OUT socket of monitor. Insert the other end of the cable into the VIDEO IN jack of a TV or
another monitor. The LCD Monitor will output a high quality video.
1. Roll the ON/OFF switch to turn ON the camera, and the power indicator will light up, The switch then acts as a dimmer for the twin
LEDs that surround the camera on the imager head and provide lighting.
2. Press and hold on the Power ON/OFF button, and power indicator will be green, and the picture will display on LCD of monitor and press
button to select recording video or take pictures status.
7. Operation
7.1. Basic Operation
-11-