Publicidad
Idiomas disponibles
Idiomas disponibles
ITEMS SUPPLIED
• 1 x device enclosure with training computer
• 2 x pedals
• 1 x large foot
• 1 x small foot
• 1 x fastening material
• 1 x tool
• 1 x 1.5 V battery, AAA type
• 1 x instructions
PARTS
1. Device enclosure
2. Right pedal
3. Rear, large foot
4. Front, small foot
5. Adjusting knob (for setting torque
resistance)
6. Left pedal
7. Training computer
FUNCTIONS OF THE COMPUTER
• The training computer is switched on by turning the pedals or pressing the red select
button (8), SCAN, then flashes in the left-hand corner of the display and the following
data is shown in succession:
T - Training time in minutes and seconds
D - Distance travelled in km
C - Count of pedal rotations in a training session
T-C - Total of the pedal rotations in several training sessions
(Notice: Removing and reinserting the battery will reset the display to zero.)
CA - Approx. number of calories consumed
STOP - The measurement is stopped if the pedals are at a standstill for longer than 4
seconds.
• To select a display permanently, press the red button.
• Press the red button several times to switch between the displays.
• Keep the red button pressed down for a few seconds to reset all data, apart from the
Publicidad
