Gacell SLH 26C Manual De Instrucciones página 7

USER MANUAL
Where:
OFF = the LED is off
ON = the LED is permanently on
BL = the LED flashes slowly (Blink = 1 flash per second)
BV = the LED flashes quickly (Blink = 3 flashes per second)
Note (*): The sequence of the stages and the relative signals differ from curve to curve.
• Once the charge is completed, LEDs DL1 (green) and DL2 (yellow) will remain on.
At that point the power cable can be disconnected from the socket and the machine can be used.
TROUBLESHOOTING
PROBLEM
The battery charger does not turn on.
The charge cycle does not start and yellow LED
blinking.
SOLUTION AND VERIFICATIONS
Ensure that the plug has been connected to the
mains socket and that the fuses are efficient.
Check the battery connection and ensure that the
polarity is respected.
Revisione n° 3 del 26/07/2021